Driver Adjusting Transmission Shift Points on GMC Truck Dashboard - Learn how to fine-tune your GMC truck's performance with step-by-step instructions for adjusting transmission shift points using factory settings. Optimize power, acceleration, and fuel efficiency easily from your truck's control panel.

Fine-Tune Your GMC Truck: Adjust Transmission Shift Points with Ease

September 20, 20242 min read

Fine-Tune Your GMC Truck: Adjust Transmission Shift Points with Ease

Adjusting Transmission Shift Points on Your GMC Truck Using Factory Settings

Want to optimize your GMC truck's performance and fuel efficiency? You can actually fine-tune your driving experience by adjusting your transmission shift points. It's easier than you might think, and we'll walk you through the process using the factory settings.

Accessing the Service Shift Points Mode:

Here's how to access the menu where you can adjust the shift points:

  1. Turn your key to the Run position without starting the engine.

  2. Press the gas pedal down slowly and fully three times within five seconds. Make sure you press it all the way down each time!

  3. Turn the key to the Off position.

  4. Press and hold the brake pedal.

  5. While holding the brake pedal, turn the key back to the Run position. You can now release the brake pedal.

  6. If you followed the steps correctly, you should see Service Shift Points displayed on your instrument panel.

Adjusting the Shift Points:

Now that you're in the right place, here’s how to make those adjustments:

  • Use the up arrow on your steering wheel to increase the RPM at which the transmission shifts into a specific gear. Raising the shift point can provide a boost in power and acceleration.

  • Use the down arrow to decrease the RPM for a particular gear. Lowering the shift point can help improve your fuel economy.

  • Repeat this process for each gear as needed.

Remember, small adjustments can make a noticeable difference. Start with minor tweaks, drive your truck for a bit to see how it feels, and then fine-tune as needed.

Saving Your Settings

Once you're satisfied with your adjustments, simply turn the key to the Off position to save your new shift points.

Need Expert Help?

Still unsure? TTS specializes in getting the most out of your truck's transmission. Contact us today, and our team will be happy to answer your questions or help you achieve your desired performance goals.

Visit prebuilttrans.com to learn more about our services or to schedule an appointment or call +1 385-462-8458 for more info! We're dedicated to keeping your pick-up truck running in tip-top shape!

© 2024 Truck Transmission Specialists. All rights reserved.

Back to Blog